ITech IT-M3400 Series

List Commands
Copyright © Itech Electronic Co., Ltd. 69
Arguments
<1-100>,<MINimum-MAXimum|MINimum|MAXimum>
Example
LIST[:STEP]:WIDT 1,1.000
Query syntax
LIST[:STEP]:WIDTh? <NR1>
Returns
NR3
LIST:REPeat <NRf+>
This command sets the number of list repetitions.
Syntax
LIST:REPeat <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
LIST:REP 3
Query syntax
LIST:REPeat?
Returns
NR3
LIST:FUNCtion <VOLTage|CURRent>
This command sets the working mode of list program.
Syntax
LIST:FUNCtion <VOLTage|CURRent>
Arguments
<VOLTage|CURRent>
Example
LIST:FUNC VOLT