ITech IT-M3400 Series

Source Commands
Copyright © Itech Electronic Co., Ltd. 51
Default value
0.0
Example
VOLT:LIM 60.0
Query syntax
[SOURce:]VOLTage[:LEVel]:LIMit[:HIGH]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:LEVel]:LIMit:LOW <NRf+>
This command sets voltage lower limit under CC priority mode.
Syntax
[SOURce:]VOLTage[:LEVel]:LIMit:LOW <NRf+>
Arguments
<MINimum-MAXimum>|MINimum|MAXimum
Default value
0.0
Example
VOLT:LIM:LOW 60.0
Query syntax
[SOURce:]VOLTage[:LEVel]:LIMit[:HIGH]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude]
<NRf+>
This command sets the output voltage value when the power supply receives a
trigger.
Syntax
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude] <NRf+>
Arguments
<NRf+> MIN TO MAX