List Commands
Copyright © Itech Electronic Co., Ltd. 73
Example
LIST ON
Query syntax
LIST[:STATe]?
Returns
0|1
[SOURce:]LIST:TERMinate:LAST<bool>
This command sets the end state of the list program.
Syntax
LIST:TERMinate <terminate>
Arguments
NORMal|LAST
Example
LIST:TERM NORM
Query syntax
LIST:TERMinate?
Returns
NORMal|LAST
LIST:PAUSe[:STATe] <BOOLEAN>
This command sets the pause state of the list program.
Syntax
LIST:PAUSe[:STATe] <BOOLEAN>
Arguments
<0|1|OFF|ON>
Example
LIST:PAUS 1
Query syntax
LIST:PAUSe[:STATe]?
To Next Page
Loading...
