ITech IT-M3400 Series

Source Commands
Copyright © Itech Electronic Co., Ltd. 61
Syntax
[SOURce:]UUT:TEMPerature:PROTection[:LEVel] <NRf+>
Arguments
<MINimum-MAXimum>|MINimum|MAXimum
Default value
MAXimum
Example
UUT:TEMP:PROT MAX
Query syntax
[SOURce:]UUT:TEMPerature:PROTection[:LEVel]? [MINimum|MAXimum]
Returns
NRf+
OFF:VOLTage <ZERO|CONSt>
This command is used to set the voltage drop speed when CC priority mode.
ZERO means that the instrument voltage rapidly drops to 0V, and when set to
CONSt, the voltage drop speed is normal.
Syntax
OFF:VOLTage <ZERO|CONSt>
Arguments
ZERO|CONSt
Default value
ZERO
Example
OFF:VOLT ZERO
Query syntax
OFF:VOLTage?
Returns
ZERO|CONSt