Source Commands
Copyright © Itech Electronic Co., Ltd. 48
Default value
0
Example
CURR:UND:PROT:STAT ON
Query syntax
[SOURce:]CURRent:UNDer:PROTection:STATe?
Returns
0|1
[SOURce:]CURRent:UNDer:PROTection:WARM
<NRf+>
This command sets the under-current warm-up time of the power supply.
Syntax
[SOURce:]CURRent:UNDer:PROTection:WARM <NRf+>
Arguments
0-30
Default value
30.00S
Example
CURR:UND:PROT:WARM 10.000
Query syntax
[SOURce:]CURRent:UNDer:PROTection:WARM? [MINimum|MAXimum]
Returns
NRf+
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>,<NRf+>
This command sets the current rising and falling slew rate of the power supply.
Syntax
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>,<NRf+>
Arguments
<MINimum-MAXimum>|MINimum|MAXimum
To Next Page
Loading...
