ITech IT-M3400 Series

Output Commands
Copyright © Itech Electronic Co., Ltd. 35
Syntax
OUTPut:SDS:DC:RELay <0|OFF|1|ON>
Arguments
<0|1|OFF|ON>
Default value
ON
Example
OUTP:SDS:DC:REL 0
Returns
0|1
Query syntax
OUTPut:SDS:DC:RELay?
OUTPut:SDS:SENSe:RELay <0|OFF|1|ON>
This command is used to switch the SDS relay to local measurement or remote
sense. 0 indicates local measurement. 1 indicates remote sensing.
Syntax
OUTPut:SDS:DC:RELay <0|OFF|1|ON>
Arguments
<0|1|OFF|ON>
Default value
ON
Example
OUTP:SDS:DC:REL 1
Returns
0|1
Query syntax
OUTPut:SDS:SENSe:RELay?
OUTPut:SDS:SURGe:SUPPress
This command is used to execute the prevent the surge function of SDS.