System Commands
Copyright © Itech Electronic Co., Ltd. 12
Syntax
SYSTem:REMote
Arguments
None
Example
SYST:REM
Query syntax
None
Returns
None
SYSTem:LOCal
This command is to switch the power supply into control from the front panel.
Syntax
SYSTem:LOCal
Arguments
None
Example
SYST:LOC
Query syntax
None
Returns
None
SYSTem:RWLock
This command locks the power supply in remote control mode. When this
command is executed, pressing the LOCAL button does not switch the
instrument to local control mode.
Syntax
SYSTem:RWLock
Arguments
None
To Next Page
Loading...
