ITech IT-M3400 Series

List Commands
Copyright © Itech Electronic Co., Ltd. 68
LIST[:STEP]:CURRent <NR1>,<NRf+>
This command sets the current value of the nth step in the list program.
Syntax
LIST[:STEP]:CURRent <NR1>,<NRf+>
Arguments
<1-100>,<MINimum-MAXimum|MINimum|MAXimum>
Example
LIST:CURRent 1,3.500
Query syntax
LIST[:STEP]:CURRent?
Returns
NR3
LIST[:STEP]:SLEW <NR1>,<NRf+>
This command sets the slew rate value of the nth step in the list program.
Syntax
LIST[:STEP]:SLEW <NR1>,<NRf+>
Arguments
<1-100>,<MINimum-MAXimum|MINimum|MAXimum>
Example
LIST[:STEP]:SLEW 1,1.000
Query syntax
LIST[:STEP]:SLEW? <NR1>
Returns
NR3
LIST[:STEP]:WIDTh <NR1>,<NRf+>
This command sets the width value of the nth step in the list program.
Syntax
LIST[:STEP]:WIDTh <NR1>,<NRf+>