System Commands
Copyright © Itech Electronic Co., Ltd. 16
Query syntax
SYSTem:COMMunicate:LAN:DHCP?
Returns
0|1
SYSTem:COMMunicate:LAN:RAWSocket:PORT
This command sets the socket port for the LAN communication.
Syntax
SYSTem:COMMunicate:LAN:RAWSocket:PORT <NR1>
Arguments
<2000-65535>
Example
SYST:COMM:LAN:RAWS:PORT 30000
Query syntax
SYSTem:COMMunicate:LAN:RAWSocket:PORT?
Returns
NR1
SYSTem:COMMunicate:LAN:MACaddress?
This command queries the communication MAC address.
Syntax
SYSTem:COMMunicate:LAN:MACaddress?
Arguments
None
Example
- > SYST:COMM:LAN:MAC?
< - "12:34:56:79:99:AA"
Note
⚫
“ - >” indicates the commands that you send to the power supply.
⚫
“< -” indicates the response from the power supply.
Returns
str
To Next Page
Loading...
