ITech IT-M3400 Series

Sense Commands
Copyright © Itech Electronic Co., Ltd. 41
Chapter9 Sense Commands
SENSe[:REMote][:STATe] <bool>
This command enables or disables the sense function.
Syntax
SENSe[:REMote][:STATe] <bool>
Arguments
0|OFF|1|ON
Default value
OFF
Example
SENS ON
Query syntax
SENSe[:REMote][:STATe]?
Returns
0|OFF|1|ON
SENSe:FILTer:LEVel <SLOW|MEDium|FAST>
This command sets the sense filter level.
Syntax
SENSe:FILTer:LEVel <SLOW|MEDium|FAST>
Arguments
<FAST|MEDium|SLOW>
Default value
SLOW
Example
SENS:FILT:LEV MED
Query syntax
SENSe:FILTer:LEVel?