System Commands
Copyright © Itech Electronic Co., Ltd. 14
Arguments
NR1 <0-30>
Default value
15
Example
SYST:COMM:GPIB:ADDR 14
Query syntax
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Returns
NR1 (0-30)
SYSTem:COMMunicate:LAN:CURRent:ADDRess
<"addr">
This command sets the IP address of the power supply.
Syntax
SYSTem:COMMunicate:LAN:CURRent:ADDRess <"addr">
Arguments
Str "<0-255>,<0-255>,<0-255>,<0-255>"
Example
SYST:COMM:LAN:CURR:ADDR "192.168.0.211"
Query syntax
SYSTem:COMMunicate:LAN:CURRent:ADDRess?
Returns
Str
SYSTem:COMMunicate:LAN:CURRent:DGATeway
<"addr">
This command sets the gateway of the power supply.
Syntax
SYSTem:COMMunicate:LAN:CURRent:DGATeway <"addr">
To Next Page
Loading...
