ITech IT-M3400 Series

System Commands
Copyright © Itech Electronic Co., Ltd. 10
Chapter5 System Commands
SYSTem:BEEPer:IMMediate
This command tests the beeper function of the power supply. If it passes the
test, a beep is issued.
Syntax
SYSTem:BEEPer:IMMediate
Arguments
None
Example
SYST:BEEP:IMM
Query syntax
None
Returns
None
SYSTem:BEEPer[:STATe] <bool>
This command enables or disables the beeper function of the power supply.
Syntax
SYSTem:BEEPer[:STATe] <bool>
Arguments
0|OFF|1|ON
Default value
1
Example
SYST:BEEP 1
Query syntax
SYSTem:BEEPer[:STATe]?
Returns
0|1