ITech IT-M3400 Series

Battery Commands
Copyright © Itech Electronic Co., Ltd. 80
BATTery[:STATe]
This command enables or disables the battery function.
Syntax
BATTery[:STATe]
Arguments
<0|1|OFF|ON>
Example
BATT 1
Query syntax
BATTery[:STATe]?
Returns
0|1
BATTery:SAVE <BANK>
This command saves the present battery test file into the specified memory.
Syntax
BATTery:SAVE <BANK>
Arguments
<1-10>
Example
BATT:SAV 1
Query syntax
None
Returns
<NR1>
BATTery:RECall <BANK>
This command recalls the battery test file you saved in the specified memory
location.