Common Commands
Copyright © Itech Electronic Co., Ltd. 88
*PSC
This command specifies whether the Service Request Enable Register (SRER)
and the Event State Enable Register (ESER) are cleared when the instrument is
powered on. The query form of this command gets the state of the power-on status
clear function.
Syntax
*PSC <Boolean>
Arguments
0|OFF|1|ON
Default value
0
Example
*PSC 0
Query command
*PSC?
Returns
0|1
*RCL
This command recalls the setups you saved in the specified memory location.
Syntax
*RCL <NRf>
Arguments
<1-10>
Default value
Not applicable
Example
*RCL 1
Query command
None
To Next Page
Loading...
