ITech IT-M3400 Series

Output Commands
Copyright © Itech Electronic Co., Ltd. 37
Syntax
OUTPut:PROTection:WDOG:DELay <NRf+>
Arguments
<MINimum-MAXimum>|MINimum|MAXimum>
Default value
2
Example
OUTP:PROT:WDOG:DEL 3
Returns
<NRf+>
Query syntax
OUTPut:PROTection:WDOG:DELay?
OUTPut:PROTection:FOLDback[:MODE] <OFF|CC|CV>
This command is used to set foldback function mode.
Syntax
OUTPut:PROTection:FOLDback[:MODE] <OFF|CC|CV>
Arguments
<OFF|CC|CV>
Default value
OFF
Example
OUTP:PROT:FOLD CC
Returns
OFF|CC|CV
Query syntax
OUTPut:PROTection:FOLDback[:MODE]?
OUTPut:PROTection:FOLDback:DELay <NRf+>
This command is used to set the delay time of FOLDBACK protection.