ITech IT-M3400 Series

Channel Selection Commands
Copyright © Itech Electronic Co., Ltd. 8
Chapter4 Channel Selection Commands
CHANnel <NR1>
This command selects the channel number.
Syntax
CHANnel <NR1>
Arguments
0-16
Default value
0
Example
CHAN 2
Query syntax
CHANnel?
Returns
NR1
INSTrument[:SELect] <NR1>
This command selects the channel. The function is the same as the command
CHANnel <NR1>.
Syntax
INSTrument[:SELect] <NR1>
Arguments
0-16
Default value
0
Example
INST[:SEL] 2
Query syntax
INSTrument[:SELect]?