ITech IT-M3400 Series Programming Guide

Parallel&Link Commands
Copyright © Itech Electronic Co., Ltd. 83
PARallel:NUMBer <NR1>
This command sets the total instrument number in the parallel operation.
Syntax
PARallel:NUMBer <NR1>
Arguments
<1-16>
Example
PAR:NUMB 3
Query syntax
PARallel:NUMBer?
Returns
NR1
LINK:MODE <OUTPut|TRACk>
This command sets the link mode.
Syntax
LINK:MODE <OUTPut|TRACk>
Arguments
OUTPut|TRACk
Example
LINK:MODE OUTP
Query syntax
LINK:MODE?
Returns
OUTPut|TRACk
LINK[:STATe] <bool>
This command enables or disables the link function.
Syntax
LINK[:STATe] <bool>

ITech IT-M3400 Series Specifications

General

Brand	ITech
Model	IT-M3400 Series
Category	Power Supply
Language	English