Battery Commands
Copyright © Itech Electronic Co., Ltd. 77
BATTery:CHARge:CURRent <NRf+>
This command is used to set the battery charging current value.
Syntax
BATTery:CHARge:CURRent <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:CHAR:CURR 3.0
Query syntax
BATTery:CHARge:CURRent? [MINimum|MAXimum]
Returns
NR3
BATTery:DISCharge:VOLTage <NRf+>
This command is used to set the battery discharge voltage value.
Syntax
BATTery:DISCharge:VOLTage <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
BATT:DISC:VOLT 3.0
Query syntax
BATTery:DISCharge:VOLTage? [MINimum|MAXimum]
Returns
NR3
BATTery:DISCharge:CURRent <NRf+>
This command is used to set the battery discharge current value.
Syntax
BATTery:DISCharge:CURRent <NRf+>
To Next Page
Loading...
