ITech IT-M3400 Series

List Commands
Copyright © Itech Electronic Co., Ltd. 70
Query syntax
LIST:FUNCtion?
Returns
VOLTage|CURRent
LIST:VOLTage:LIMit[:HIGH] <NRf+>
This command sets the voltage upper limit of list program.
Syntax
LIST:VOLTage:LIMit[:HIGH] <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
LIST:VOLT:LIM 80
Query syntax
LIST:VOLTage:LIMit[:HIGH]? [MINimum|MAXimum]
Returns
NR3
LIST:VOLTage:LIMit:LOW <NRf+>
This command sets the voltage lower limit of list program.
Syntax
LIST:VOLTage:LIMit:LOW <NRf+>
Arguments
<MINimum-MAXimum|MINimum|MAXimum>
Example
LIST:VOLT:LIM:LOW 20
Query syntax
LIST:VOLTage:LIMit:LOW? [MINimum|MAXimum]
Returns
NR3