ITech IT-M3400 Series

Output Commands
Copyright © Itech Electronic Co., Ltd. 36
Syntax
OUTPut:SDS:SURGe:SUPPress
Arguments
None
Default value
None
Example
OUTP:SDS:SURG:SUPP
Returns
0|1
0: indicates this function execute fail. 1: indicates this function execute success.
Query syntax
OUTPut:SDS:SURGe:SUPPress?
OUTPut:PROTection:WDOG[:STATe] <0|OFF|1|ON>
This command enables or disables the state of the communication watchdog.
Syntax
OUTPut:PROTection:WDOG[:STATe] <0|OFF|1|ON>
Arguments
<0|1|OFF|ON>
Default value
OFF
Example
OUTP:PROT:WDOG 0
Returns
0|1
Query syntax
OUTPut:PROTection:WDOG[:STATe]?
OUTPut:PROTection:WDOG:DELay <NRf+>
This command sets the time of the communication watchdog.