ITech IT-M3400 Series

Trace Commands
Copyright © Itech Electronic Co., Ltd. 63
Returns
NR1
TRACe:FEED:CONTrol <NEVer|NEXT|ALWays>
This command is used to select cache control. Select NEVer, Save to Cache is
disabled; select NEXT, save process starts and will stop when the cache is filled
in. Select ALWays. After cache is filled in, circulate the cache.
Syntax
TRACe:FEED:CONTrol <NEVer|NEXT|ALWays>
Arguments
NEVer|NEXT|ALWays
Default value
NEVer
Example
TRAC:FEED:CONT NEXT
Query syntax
TRACe:FEED:CONTrol?
Returns
NEVer|NEXT|ALWays
TRACe:FEED[:SELected]<BOTH|VOLTage|CURRent>
This command selects the reading source saved in the cache. If VOLTage is
selected, the voltage reading is saved in cache; if CURRent is selected, the
current reading is saved in cache. If BOTH is selected, both voltage and current
are saved in cache when saving is executed.
Syntax
TRACe:FEED[:SELected]<BOTH|VOLTage|CURRent>
Arguments
BOTH|VOLTage|CURRent
Default value
VOLTage