ITech IT-M3400 Series Programming Guide

System Commands
Copyright © Itech Electronic Co., Ltd. 15
Arguments
Str "<0-255>,<0-255>,<0-255>,<0-255>"
Example
SYST:COMM:LAN:CURR:DGAT “192.168.0.1”
Query syntax
SYSTem:COMMunicate:LAN:CURRent:DGATeway?
Returns
Str
SYSTem:COMMunicate:LAN:CURRent:SMASk
<"addr">
This command sets the subnet mask of the power supply.
Syntax
SYSTem:COMMunicate:LAN:CURRent:SMASk <"addr">
Arguments
Str "<0-255>,<0-255>,<0-255>,<0-255>"
Example
SYST:COMM:LAN:CURR:SMAS “255.255.255.0”
Query syntax
SYSTem:COMMunicate:LAN:CURRent:SMASk?
Returns
Str
SYSTem:COMMunicate:LAN:DHCP <Bool>
This command enables or disables the dynamic IP address function.
Syntax
SYSTem:COMMunicate:LAN:DHCP <Bool>
Arguments
<0|1|OFF|ON>
Example
SYST:COMM:LAN:DHCP 1

ITech IT-M3400 Series Specifications

General

Brand	ITech
Model	IT-M3400 Series
Category	Power Supply
Language	English