Section 3 - Maintenance
Routine Maintenance
Tyres and Wheels
3 - 50 3 - 50
9803/9450-1
Renewing Segments of Optional Non-
Inflatable Tyres
Non-inflatable tyres are available as an option. These tyres
consist of a number of individual segments bolted to the
wheel rim.
Damaged segments can be renewed individually. Loosen
and remove the four nuts and washers A (two each side of
the wheel). Lift the segment clear by extracting its fixing
studs from the holes in the wheel rim.
Fit a new segment in reverse order to removal, then tighten
the retaining nuts to a torque of 28 Nm (21 lbf ft, 3 kgf m).
Fig 36.
A
To Next Page
Loading...
