Section 3 - Maintenance
Routine Maintenance
Fuel System
3 - 44 3 - 44
9803/9450-1
Bleeding the Fuel System
If either the in-line filter or main filter has been disturbed it
will be necessary to bleed air from the system.
1 Slacken bleed screw N and operate the priming pump
P by squeezing it until fuel spurts from the loosened
connection with no entrapped air.
2 Tighten the bleed screw and check the system for
leaks. Tighten connections or change seals as
required.
!MWARNING
Fuel oil is highly inflammable. Stop the engine
immediately if a fuel leak is suspected. Completely
wipe off any spilt fuel which could cause a fire.
8-3-4-3_1
Fig 30.
P
To Next Page
Loading...
