Section F - Transmission
F - 1 F - 1
9803-9450-1
Description
Drive Train
Fig 1.
The drive train consists of two hydraulic motors, four drive
chains, two right hand hub assemblies and two left hand
drive shafts. The drive chains run in an oil bath contained
within a chain case on the right hand side of the machine.
The hydraulic motors A and B are mounted one above the
other onto adapter housings which are bolted to the inner
side of the chain case. Each adapter housing contains a
drive shaft which extends into the chain case and on which
is mounted a double sprocket. The motor output shafts are
splined into the drive shafts.
The upper motor A drives the left hand wheels by means
of two chains C and D to sprockets mounted on the inner
ends of long driveshafts E and F. The driveshafts rotate on
taper roller bearings within tubes which extend through the
chassis to the left hand side of the machine.
A
B
C
J
E
D
K
F
L
G
H
To Next Page
Loading...
