jcb Robot 160 - Transmission Pump; Hydraulic Motors - Wheeled Machines; Hydraulic Motors - Tracked Machines; Loader Valve Block - Servo Machines

Section E - Hydraulics
Technical Data
General Data
E - 2 E - 2
9803-9450-2
Transmission Pump
Hydraulic Motors - Wheeled Machines
Hydraulic Motors - Tracked Machines
Loader Valve Block - Servo Machines
Loader Valve Block - Manual Machines
Type Tandem axial piston Series 42
Displacement
39 cc/rev (2.4 in
3
/rev)
Control Servo non-feedback proportional.
Charge Pressure (oil temperature at 50° C) variable with
engine speed
17 - 18 bar (246 - 261 lbf/in
2
) at engine idle
25 - 27 bar (362 - 391 lbf/in
2
) at max. rev/min
High Pressure ‘Loop’ Valve Pressure
385 bar (5585 lbf/in
2
)
Type Geroter
Displacement
395 cc/rev (24 in
3
/rev)
Type MCR5C Piston
Displacement
820 cc/rev (50 in
3
/rev)
Services Operated:
- Spool 1 Boom Lift - Hydraulic Servo
- Spool 2 Quickhitch Tilt - Hydraulic Servo
- Spool 3 Auxiliary - Servo operated via proportional solenoid valve
Services Operated:
- Spool 1 Boom Lift - Manually operated with Solenoid Spool Lock
- Spool 2 Quickhitch Tilt - Manually operated with Solenoid Spool Lock
- Spool 3 Auxiliary - Servo operated via proportional solenoid valve
P
T
123
P
T
123