Section A - Attachments
Maintenance
Manure/Silage Fork with Top Grab
A - 7 A - 7
9803-9460-1
Manure/Silage Fork with Top Grab
The Manure/Silage fork is fitted with a top grab as
standard. This gives extra security to the load while moving
the machine.
The grab is opened and closed by a hydraulic ram
mounted on the fork frame.
Daily Maintenance
1 Clean with the rest of the machine.
2 Check for damage. Make sure the tines are secure
and in good condition.
3 Check for signs of hydraulic leaks. Should the ram A
require servicing see Section E.
!MWARNING
Fluid Under Pressure
Fine jets of fluid at high pressure can penetrate the
skin. Keep face and hands well clear of fluid under
pressure and wear protective glasses. Hold a piece of
cardboard close to suspected leaks and then inspect
the cardboard for signs of fluid. If fluid penetrates your
skin, get medical help immediately.
INT-3-1-10_2
4 Grease at the points indicated.
Total of 5 grease points.
Fig 4.
Attachment Frame
Some attachments, e.g. the Hammermaster, Earth Drill
and Compactor, utilise an attachment frame for installation
on a Skid Steer Loader.
Daily Maintenance
1 Clean with the rest of the machine.
2 Check for damage. Repair or replace as necessary.
Fig 5.
To Next Page
Loading...
