Section J - Tracks
J - 24 J - 24
9803-9450-1
Track Frame Assembly
Removal
Fig 32.
1 Raise and support the machine and remove the track
(see K
Removal ( T J-15)).
2 Disconnect the motor feed and return hoses having
marked them for correct reconnection.
3 Sling the track frame as shown and support the
weight using a suitable hoist.
4 Remove the bolts from the front mounting.
5 Remove the bolts from the rear mounting. It will be
necessary to release the top two bolts gradually whilst
easing the frame away from the machine.
!MCAUTION
Do not pull the frame too far away otherwise the hoses
will rip off.
0072
6 Once access has been gained, disconnect the motor
drain and brake hoses having marked them for
correct reconnection.
7 Manoeuvre the track frame away from the machine.
76520
To Next Page
Loading...
