Section 3 - Maintenance
Routine Maintenance
Boom Safety Strut
3 - 20 3 - 20
9803/9450-1
Removing
!MWARNING
You could be killed or injured if the loader control is
accidentally operated. Make sure no-one comes near
the machine while you remove the safety strut.
2-3-1-3
1 Make sure that the drive control is in the neutral (rest)
position.
2 Raise the loader arm to take the weight off the safety
strut A. Stop the engine.
3 Remove the strut:
Release securing strap B.
Remove the safety strut from the lift ram.
Return the safety strut to its stowage position C on top
of the lift arm.
Fig 3.
To Next Page
Loading...
