jcb Robot 160 - Pre-Start Cold Checks, Service Points and Fluid Levels

Section 3 - Maintenance
Routine Maintenance
Service Schedules
3 - 8 3 - 8
9803/9450-1
Pre-start Cold Checks, Service Points and Fluid Levels
Operation 10 50 500 1000 2000
ENGINE
Coolant Quality and Level - Check

Cooling System - Drain and Refill

Oil level - Check

Oil and Filter
(1)(2)
- Change

Air Cleaner Dust Valve
(3)
- Change

Air Cleaner Outer Element - Change

Air Cleaner Inner Element - Change

Engine Fuel Filter - Change

Front End Accessory Drive (FEAD) Belt
Condition
- Check

All Hoses - Condition - Check

Radiator - Clean

Breather Gauze - Clean

Valve Clearances - Check and Adjust

Oil Filler and Dipstick Seals - Check and Adjust

Rocker Cover and Injector Seals - Change

Injectors - Change
Injector(s) Leak Off Rail - Change
High Pressure Fuel Lines - Inspect
TRANSMISSION, AXLES AND STEERING
Motor Bearing - Check

Motor Mounting Bolts - Check

Wheel Nut Security - Check

Wheel Hub Mounting Nut - Tightness - Check

Wheel Hub Bearing Clearance - Check

Tyre Pressure - Check

Drive Chain Case Oil Level - Check

Drive Chain Case Oil - Change

Drive Chain Tension - Check/Adjust
