Section A - Attachments
A - 1 A - 1
9803-9450-1
Hydraulic Connections
General Information
When fitting hydraulically operated optional attachments to
the Robot the following points should be noted:
When a Hammer or Earth Drill attachment is required a
drain line must be fitted to the machine. These two
attachments can only be used on machines with High-Flow
circuit fitted.
Extra auxiliary relief valves can be fitted to the valve block
and set to the required pressure to provide protection for
certain attachments where necessary. The Standard
Sweeper must have an auxiliary relief fitted but the
Sweeper/Collector already has a cross line relief fitted on
the unit. The Manure/Silage Fork with Grab does not
require auxiliary relief valves.
Care must be taken if using attachments from other
machines as the hydraulic fluids may not be compatible.
To Next Page
Loading...
