Section 3 - Maintenance
Routine Maintenance
Engine Air Filter
3 - 32 3 - 32
9803/9450-1
5 Clean the inside the canister E and cover B.
6 Carefully insert the new elements into the canister.
Ensure they are pushed fully onto their spigots. Fit
cover B with dust valve K at the bottom.
7 Make sure that the wire is connected to the Air Filter
Blocked switch G.
8 Close and lock the engine compartment cover.
Cleaning the Air Filter Dust Valve
Important: Do not run the engine with the dust valve K
removed.
Check the dust valve K is not blocked.
Inspect the rubber flaps for cuts and nicks and check that
the rubber is not perished. Renew if necessary.
Fig 16.
To Next Page
Loading...
