jcb Robot 160 - Dismantling and Assembly

Section C - Electrics
Starter Motor
Dismantling and Assembly
C - 50 C - 50
9803-9450-1
Dismantling and Assembly
Fig 42.
Dismantling
Note: Dismantle only to item 34 unless the field windings
are to be renewed. Test the windings electrically before
removing them from the motor yoke 15.
Using a slotted steel tube, displace ring 23 to permit
withdrawal of ring 22.
Allow brake shoes 28 to remain in the end plate 11 unless
requiring renewal.