EasyManua.ls Logo

jcb Robot 160 - Engine Air Filter; Changing the Elements

jcb Robot 160
355 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 3 - Maintenance
Routine Maintenance
Engine Air Filter
3 - 31 3 - 31
9803/9450-1
Engine Air Filter
Changing the Elements
Fig 15.
!MCAUTION
The outer element must be renewed immediately if the
warning light on the instrument panel illuminates.
2-3-3-1
!MCAUTION
Do not run the engine when the outer element has
been removed.
16-3-3-1
Note: Do not attempt to wash or clean the elements - they
must only be renewed.
Note: Do not run the engine with the dust valve K
removed.
Note: In a dusty environment, the outer element may have
to be changed more frequently than the service schedule
recommendation. A new inner element must be fitted at
least every third time the outer element is changed. As a
reminder, mark the inner element with a felt tipped pen
each time the outer element is changed.
1 Stop the engine.
2 Open the engine cover. K
Engine Cover ( T 3-24).
3 Release three clips A and remove cover B.
4 Remove outer element C.Take care not to tap or
knock the element. If necessary, remove inner
element D.
A
A
K
C
D
B
E
G

Table of Contents

Related product manuals