Section 3 - Maintenance
Routine Maintenance
Service Requirements
3 - 2 3 - 2
9803/9450-1
carry out these necessary tests and inspections. This
ensures that only JCB Factory trained, experienced and
up-to-date Engineers supported with all of the available
data and material provided only to a JCB Distributor will
ensure a thorough and reliable standard.
Obtaining Replacement Parts
T3-004_2
We recommend you fit only JCB Genuine Parts. A Parts
Book will help you identify parts and order them from your
JCB distributor.
Your dealer will need to know the exact model, build and
serial number of your machine. See Identifying Your
Machine in INTRODUCTION section.
The data plate also shows the serial numbers of the
engine, transmission and axle(s), where applicable. But
remember if any of these units have been changed, the
serial number on the data plate may be wrong. Check on
the unit itself.
To Next Page
Loading...
