Section 1 - General Information
Service Tools
Numerical List Section E- Hydraulics
1 - 20 1 - 20
9803-9450-1
Numerical List Section E- Hydraulics
The tools listed in the table are special tools required for
testing, removing and replacing hydraulics. These tools
are available from JCB Service.
Note: Tools other than those listed will be required. It is
expected that such general tools will be available in any
well equipped workshop or be available locally from any
good tool supplier.
Part
Number
Description Tool Detail Reference
1406/0011 Bonded Washer K
Fig 28. ( T 1-24)
1406/0018 Bonded Washer K Fig 28. ( T 1-24)
1406/0021 Bonded Washer K Fig 28. ( T 1-24)
1406/0029 Bonded Washer K Fig 28. ( T 1-24)
1604/0003 Adapter K Fig 29. ( T 1-25)
1604/0004 Adapter K Fig 29. ( T 1-25)
1604/0006 Adapter K Fig 29. ( T 1-25)
1606/0003 Adapter K Fig 29. ( T 1-25)
1606/0004 Adapter K Fig 29. ( T 1-25)
1606/0007 Adapter K Fig 29. ( T 1-25)
1606/0008 Adapter K Fig 29. ( T 1-25)
1606/0009 Adapter K Fig 29. ( T 1-25)
1612/0006 Adapter K Fig 25. ( T 1-24)
331/22966 Pump Drive Alignment Tool K Fig 38. ( T 1-27)
701/80490 P.M.S. Test Button K Fig 39. ( T 1-27)
716/30334 P.M.S. Potentiometer K Fig 40. ( T 1-27)
816/00189 Blanking Cap K Fig 31. ( T 1-25)
816/00190 Blanking Cap K Fig 31. ( T 1-25)
816/00193 Blanking Cap K Fig 31. ( T 1-25)
816/00196 Blanking Cap K Fig 31. ( T 1-25)
816/00197 Blanking Cap K Fig 31. ( T 1-25)
816/00294 Blanking Cap K Fig 31. ( T 1-25)
816/15118 Pressure Test Adapter K Fig 24. ( T 1-23)
816/50043 'T' Adapter K Fig 32. ( T 1-25)
816/55038 Pressure Test 'T' Adapter K Fig 23. ( T 1-23)
816/55040 Pressure Test 'T' Adapter K Fig 23. ( T 1-23)
816/60096 'T' Adapter K Fig 32. ( T 1-25)
892/00047 'T' Adapter K Fig 32. ( T 1-25)
892/00048 'T' Adapter K Fig 32. ( T 1-25)
892/00055 Blanking Plug K Fig 30. ( T 1-25)
892/00056 Blanking Plug K Fig 30. ( T 1-25)
To Next Page
Loading...
