Section 3 - Maintenance
Routine Maintenance
Service Schedules
3 - 10 3 - 10
9803/9450-1
Functional Test and Final Inspection
Operation 10 50 500 1000 2000 6000
ENGINE
Idle Speed
(1)
- Check and Adjust
Max. No-Load Speed - Check and Adjust
Pulled down speed - Check
Exhaust System Security - Check
Exhaust Smoke - Check
Air Inlet System Security - Check
Throttle System and Control Cable - Check
Engine for Vibration/Noise
TRANSMISSION, AXLES AND STEERING
Transmission Operation - Check
Transmission Pressure - Check
HYDRAULICS
Operation of All Services - Check
MRV Pressure at Max RPM - Check and Adjust
ARV Pressure - Check and Adjust
Control Isolation - Check
Hydraulic System - Check
BRAKES
Park Brake - Check/Adjust
ELECTRICS
Starter Motor - Check
Alternator - Output - Check
All Electrical Equipment Operation, (warning
lights, beacon, alarms, horn, wipers etc.)
- Check
BODYWORK AND CAB
Seat/Seat Belts - Check
Forks - Fit and Check
Security
ATTACHMENTS
Attachment Operation - Check
To Next Page
Loading...
