Section 3 - Maintenance
Routine Maintenance
Service Schedules
3 - 9 3 - 9
9803/9450-1
HYDRAULICS
Oil - Sample/Change
Oil Level - Check
Oil Filter - Change
Suction Strainer - Clean
Ram Piston Rods for Damage/ Leaks - Check
Hoses for Damage/ Leaks - Check
Pipework for Damage/ Leaks - Check
Breather - Check/Clean
ELECTRICS
Battery Electrolyte Level (if applicable) - Check
Battery Terminals for Condition and
Tightness
- Check
Battery Charge Condition - Check
Wiring for Chafing/Routing - Check
BODYWORK AND CAB
All Pivot Pins - Grease
Doors and Hinges - Lubricate
Throttle Controls and Linkages - Lubricate
Fire Extinguisher (if fitted) - Check
ROPS/FOPS Structure - Check
Windscreen Washer Fluid Level - Check
Quickhitch Locking Peg Housing - Change
TRACKS AND RUNNING GEAR
Track Tension - Check
ATTACHMENTS
Optional Equipment (As Required) - Check
(1) If operating under arduous conditions, change the engine oil and filter every 250 hours.
(2) The oil service interval will be affected if there is a high content in the fuel. Refer to Fuel System for more
information.
(3) More frequently if operating in dusty working environments.
Operation 10 50 500 1000 2000
To Next Page
Loading...
