Section 1 - General Information
1 - 2 1 - 2
9803-9450-1
Identifying your Machine
Machine Model and Serial Number
This manual provides information for the following wheeled
models in the JCB Skid Steer Loader Range.
– Robot 160 serial number 1602000 to 1604999.
– Robot 160HF serial number 1602000 to 1604999.
– Robot 170 serial number 1602000 to 1604999.
– Robot 170HF serial number 1602000 to 1604999.
– Robot 180 serial number 1602000 to 1604999.
– Robot 180HF serial number 1602000 to 1604999.
This manual also provides information for the following
tracked models in the JCB Skid Steer Loader Range.
– Robot 180T serial number 1803000 to 1806999.
– Robot 180T HF serial number 1803000 to 1806999.
Information also covers both wheeled and tracked
machines unless otherwise stated.
Machine Identification Plate
Your machine has an identification plate mounted on the
loader tower. The serial numbers of the machine and its
major units are stamped on the plate.
The serial number of each major unit is also stamped on
the unit itself. If a major unit is replaced by a new one, the
serial number on the identification plate will be wrong.
Either stamp the new number of the unit on the
identification plate, or simply stamp out the old number.
This will prevent the wrong unit number being quoted when
replacement parts are ordered.
The machine and engine serial numbers can help identify
exactly the type of equipment you have.
Fig 1.
To Next Page
Loading...
