Section F - Transmission
F - 13 F - 13
9803-9460-1
Drive Chains
Removal and Replacement
Removal
It is assumed that roadwheels are removed and the
machine is correctly supported.
Drain the oil from the chain case (see Section 3)
Remove the chain case access cover.
Note: The rear chains must be released from the motor
sprockets before the front chains can be removed.
Remove the right hand hub assemblies
K
Removal ( T F-5).
Lift out the right hand chains.
Remove the seat base. Slacken the nuts A securing the
upper motor mounting to the chain case. Slacken locknuts
B and screw in the adjustment bolts C to lower the
mounting and thus slacken the left hand drive chains.
Fig 10.
A
B
C
To Next Page
Loading...
