Section A - Attachments
Maintenance
Pallet Forks
A - 6 A - 6
9803-9460-1
Pallet Forks
The pallet fork frame includes a Rating Plate which gives
its weight and its Safe Working Load.
The forks should always be used in pairs as supplied. Each
fork is stamped with its Part Number and Safe Working
Load.
!MCAUTION
The Safe Working Load stamped on each fork is for the
fork itself. It is not for the machine to which the fork
may be fitted. Before lifting any load, check the weight
of the load against the Safe Working Load of the
machine.
2-4-5-3
Daily Maintenance
1 Clean with the rest of the machine.
2 Oil the spring loaded locking levers A.
3 Grease the top rail slots.
4 Check for damage. Repair or replace as necessary.
Remember that the forks must be replaced as a pair.
Fig 3.
To Next Page
Loading...
