Section 2 - Care & Safety
Safety Check List
Safety Check List
2 - 7 2 - 7
9803-9450-1
!MWARNING
Controls
You or others can be killed or seriously injured if you
operate the control levers from outside the cab.
Operate the control levers only when you are correctly
seated inside the cab.
INT-2-1-3
!MCAUTION
Passengers
Passengers in or on the machine can cause accidents.
Do not carry passengers.
INT-2-2-2_1
!MWARNING
Fires
If your machine is equipped with a fire extinguisher,
make sure it is checked regularly. Keep it in the correct
machine location until you need to use it.
Do not use water to put out a machine fire, you could
spread an oil fire or get a shock from an electrical fire.
Use carbon dioxide, dry chemical or foam
extinguishers. Contact your nearest fire department as
quickly as possible. Firefighters should use self-
contained breathing apparatus.
INT-3-2-7_2
!MWARNING
Seat Belt
Operating the machine without a seat belt can be
dangerous. Before starting the engine, make sure your
seat belt is fastened. Check the tightness and
condition of the seat belt securing bolts regularly (see
maintenance schedules).
INT-2-1-8_1
!MWARNING
Should the machine start to roll over, you can be
crushed if you try to leave the cab. If the machine
starts to roll over, do not try and jump from the cab.
Stay in the cab, with your seat belt fastened.
INT-2-1-12
!MWARNING
Entering/Leaving
Entering or leaving the cab or canopy must only be
made where steps and handrails are provided. Always
face the machine when entering and leaving. Make
sure the step(s), handrails and your boot soles are
clean and dry. Do not jump from the machine. Do not
use the machine controls as handholds, use the
handrails.
INT-2-1-7_1
!MWARNING
Safe Working Loads
Overloading the machine can damage it and make it
unstable. Study the specifications in the Operator
Manual before using the machine.
7-1-1-8_2
!MWARNING
Road Wheel Alignment
At the start of each working period, and at least once
a day, or if having difficulty in steering, check and, if
necessary, re-align the road wheels.
2-1-1-10