Section 3 - Maintenance
Routine Maintenance
Fluids, Lubricants and Capacities
3 - 13 3 - 13
9803/9450-1
– Ensure that the antifreeze complies with International
Specification ASTM D6210.
– Always read and understand the manufacturer's
instructions.
– Ensure that a corrosion inhibitor is included. Serious
damage to the cooling system can occur if corrosion
inhibitors are not used.
– Ensure that the antifreeze is ethylene glycol based
and does not use Organic Acid Technology (OAT).
To Next Page
Loading...
