Chapter 2 THE BASIC OPERATION
No. Name Description
ձ MENU button
Press
: Open/Close the menu.
Long press
: Open the code input screen (the Adjust Menu).
ղ CLR button
Press
: Cancel menu operations.
Return to upper menu.
Stop the alarm sound.
Long press: Cancel menu operations.
ճ Cross key
Press
: Select menu items. Moves the cursor.
Long press: Accelerate cursor movement.
մ ENT button
Press: Enter the selected menu item.
Long press: Register menu shortcut to the USER1 button and
USER2 button.
յ RANGE button Press: Switche the range.
ն USER1 button
Press/Long press: The menu registered in the “User” menu of
the in Main Menu open.
շ USER2 button
Press/Long press: The menu registered in the “User” menu of
the in Main Menu opens.
ո VRM button
Press: Display VRM1, and change to VRM operation mode.
Press twice: Display VRM2, and change to VRM operation
mode.
Long press: Turn off the VRM1 or 2 which is selected by short-
pressing the VRM button.
չ EBL button
Press: Display EBL1, and change to EBL operation mode.
Press twice: Display EBL2, and change to EBL operation
mode.
Long press: Turn off the EBL1 or 2 which is selected by short-
pressing the EBL button.
պ MULTI control
Press: When no menu is displayed, the MULTI control menu
is displayed.
While any menu is displayed, determine the item
selection on the menu.
Long press: Turn off the several functions, etc.
Turn right: Move the cursor to the right when any menu is not
displayed.
Move clockwise EBL direction when EBL operation.
Increases VRM ring size when VRM operation.
Moves clockwise the parallel cursor direction when
parallel cursor operation.
Increase the value when inputting a numerical value.
To Next Page
Loading...
