JRC JMA-3910-4 User Manual

3 – 45
3.3
3.3.23.7 Setting Vector Time
This function is used to set the vector length.
The default setting is 6 minutes.
Setting procedures differ between the fishing and merchant ship modes.
Fishing boat mode
Procedures
1. Press the
SUB
MENU
key to open the SUBMENU.
2. Press the
3
key to open the RADAR #3 menu.
3. Press the
3
key to open the EPA menu.
4. Press the
1
key to select "VECTOR TIME".
5. Press the
1
key to enable the vector time to be entered.
6. Enter the vector time (0 to 60 minutes) using numeric keys (
0
to
9
).
7. Press the
ENT
key to confirm the setting.
Exit
8. Press the
SUB
MENU
key.
Merchant ship mode
Procedures
Press the
VECT+
or
VECT–
DEST
key to increase or decrease the vector time every
minute.
EPA
EPA
Press an item number key.
0. PREVIOUS MENU
1. VECTOR TIME 0 MIN (0-60 MIN)
2. PLOT NUMBER OFF
ON
3. LIMITS CPA 1.0 NM (0.1-9.9 NM)
TCPA 15 MIN (1-99 MIN)
4. AUDIBLE WARNING OFF ON
5. DISPLAY OF CPA RING OFF ON
6.
7.
8.
9.
To close this menu, Press (SUB MENU) key.
Attention

JRC JMA-3910-4 Specifications

General

Brand	JRC
Model	JMA-3910-4
Category	Marine Radar
Language	English