JRC JMA-3910-4 - Adjusting Position by Entering Latitude ／ Longitude on Own Ship

7 – 56
7.5
7
7.5.7.4 Adjusting Position by Entering Latitude ／ Longitude on Own Ship
Procedures
1. Follow procedures 1 and 2 in subsection 7.5.7.1 to open the INIT SETTING
#3 menu.
2. Press the
4
key to select "CHART CENTER POSITION".
3. Press the
4
key, enter an adjustment value for N (north latitude) / S
(south latitude) using numeric keys and press the
ENT
key.
4. Enter an adjustment value for E (east longitude) / W (west longitude) using
numeric keys and press the
ENT
key.
The data input from the GPS, if any, is prioritized.
Exit
5. Press the
SUB
MENU
key.
INIT SETTING #3
INIT SETTING #3
Press an item number key.
0. PREVIOUS MENU
1. SHIFT COAST LINE #1 SETTING
DELETE
(RADAR PICTURE)
2. SHIFT COAST LINE #2 N 0.000'
E 0.000'
3. LAT ／ LON CORRECTION N 0.000'
E 0.000'
4. CHART CENTER POSITION N 35˚00.000'
E 135˚00.000'
5. DATA INPUT FORMAT 183 JRC 180
6. DATA ／ TIME
OFF UTC LOCAL
7. SHIP'S TYPE FISHING BOAT
MERCHANT
8.
9. NEXT MENU
To close this menu, Press (SUB MENU) key.