JRC JMA-3910-4 - Setting Drift

7 – 34
7.5
7
7.5.3.8 Setting Drift
This function is used to manually set the drift.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
9
key to open the INIT SETTING #1 menu.
3. Press the
6
key to select "DRIFT".
4. Press the
ENT
or
6
key to set the system in the numerical value
entry mode.
5. Set the direction of the drift using numeric keys (
0
to
9
) and
press the
ENT
key.
6. Set the speed of the drift using numeric keys (
0
to
9
) and press
the
ENT
key (9.9 max.).
Exit
7. Press the
SUB
MENU
key.