JRC JMA-3910-4 User Manual

7 – 33
7.5
7.5.3.7 Setting Ship Speed
This function is used to manually set the ship speed.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
9
key to open the INIT SETTING #1 menu.
3. Press the
3
key to select "MANUAL SPEED".
4. Press the
ENT
or
3
key to set the system in the numerical value
entry mode.
5. Set the speed using numeric keys (
0
to
9
) and press the
ENT
key (99.9 max.)
Exit
6. Press the
SUB
MENU
key.
After data is entered, the following letters appear on the top of the screen.
Entered by GPS: GPS
Entered by DGPS: DGPS
Entered by Loran: LOR
Entered by other: NMEA Talker ID is displayed. Ask the manufacturer for the ID
(see page 7-38).
Init setting #1
INIT SETTING #1
Press an item number key.
0. PREVIOUS MENU
1. COURSE EQUIPMENT
GYRO HDG SENSOR
2. SPEED EQUIPMENT MANUAL
LOG GPS 2AXIS
3. MANUAL SPEED xx. x KT
4. FUNCTION MENU
5. BUZZER VOLUME OFF LOW MIDDLE
HIGH
6. DRIFT SET x .x°
DRIFT x. x KT
7. GPS INITIALIZE MENU
8. SETTING DGPS ／ STATUS
9. NEXT MENU
To close this menu, Press (SUB MENU) key.

JRC JMA-3910-4 Specifications

General

Brand	JRC
Model	JMA-3910-4
Category	Marine Radar
Language	English