7 – 37
7.5
7.5.3.11 Connecting Navigation Equipment
This function is used to connect and set the GPS.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
9
key three times to open the INIT SETTING #3 menu.
3. Press the
5
key to select "DATA INPUT FORMAT".
4. Press the
5
key several times to select either "183", "JRC" or "180".
5. Press the
ENT
key to confirm the setting.
Exit
6. Press the
SUB
MENU
key.
When "183" is selected, the talker ID is displayed on the bottom of the screen in the
plot mode after data is received from the navigation system. Ask the navigation system
manufacturer for the ID.
INIT SETTING #3
INIT SETTING #3
Press an item number key.
0. PREVIOUS MENU
1. SHIFT COAST LINE #1 SETTING
DELETE
(RADAR PICTURE)
2. SHIFT COAST LINE #2 N 0.000'
E 0.000'
3. LAT ／ LON CORRECTION N 0.000'
E 0.000'
4. CHART CENTER POSITION N 35˚00.000'
E 135˚00.000'
5. DATA INPUT FORMAT 183 JRC 180
6. DATA ／ TIME
OFF UTC LOCAL
7. SHIP'S TYPE FISHING BOAT
MERCHANT
8.
9. NEXT MENU
To close this menu, Press (SUB MENU) key.
To Next Page
Loading...
Need help?
General
