JRC JMA-3910-4 User Manual

3– 75
3.5
3.5.5 Displaying the Contour of the Shoreline ROM Card by JRC
This function is used to display and select depth and color of contour of JRC card.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
4
key to open the RADAR #4 menu.
3. Press the
8
key to open the CONTOUR OF JRC CARD menu.
4. Press the numeric keys (
1
to
9
) to select contour number.
5. Press the numeric key (
1
to
9
) pressed in procedure 4 again,
the depth of the contour number is selected.
Enter the depth of the contour number by using numeric key (
0
to
9
), and press the
ENT
key to confirm the setting.
6. Press the numeric key (
1
to
9
) pressed in procedure 4 again,
the color of the contour number is selected.
Press the same numeric key (
1
to
9
) to select color, and press
the
ENT
key to confirm the setting.
7. By procedure 4 to 6, the depth of contour of JRC card can be selected 8
patterns.
Exit
8. Press the
SUB
MENU
key.
CONTOUR OF JRC CARD
CONTOUR OF JRC CARD
Press an item number key.
0. PREVIOUS MENU
1. 10 M
OFF SKY GRN YEL PNK
2. 20 M OFF WHT SKY BLU GRN YEL
PNK RED
3. 30 M OFF WHT SKY BLU GRN
YEL PNK RED
4. 40 M OFF WHT SKY BLU
GRN YEL PNK RED
5. 50 M OFF WHT SKY BLU
GRN YEL PNK RED
6. 60 M OFF WHT SKY BLU
GRN YEL PNK RED
7. 70 M OFF WHT SKY BLU GRN YEL PNK RED
8. 80 M OFF WHT SKY BLU
GRN YEL PNK RED
9. OTHER
To close this menu, Press (SUB MENU) key.

JRC JMA-3910-4 Specifications

General

Brand	JRC
Model	JMA-3910-4
Category	Marine Radar
Language	English